| Customization: | Available |
|---|---|
| Output Type: | Dual |
| Warranty: | >2 Years |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Main Component | Description |
| ESP32-S3-WROOM-1/1U/2 | The ESP32-S3-WROOM-1, ESP32-S3-WROOM-1U, and ESP32-S3-WROOM-2 are universal Wi-Fi + Bluetooth Low Energy (BLE) MCU modules. They feature a rich set of peripherals, powerful neural network computing capabilities, and signal processing performance, specifically designed for AI and AIoT applications. The ESP32-S3-WROOM-1 and ESP32-S3-WROOM-2 integrate a PCB antenna, while the ESP32-S3-WROOM-1U uses a connector for an external antenna. |
| 5V to 3.3V LDO | Power converter. Input: 5V, Output: 3.3V. |
| Pin Headers | All available GPIO pins (except the Flash SPI bus) are broken out to the pin headers on the development board. Please refer to the pin header section for more information. |
| USB-to-UART Port | Micro-USB interface. It can be used to power the board, flash firmware to the chip, and also act as a communication interface to talk to the chip via the onboard USB-to-UART bridge. |
| Boot Button | Download button. Hold down the Boot button and then momentarily press the Reset button to enter "Firmware Download" mode for flashing firmware via the serial port. |
| Reset Button | Reset button. |
| USB Port | ESP32-S3 USB OTG interface, supporting Full-Speed USB 1.1 standard. This USB interface can be used to power the board, flash firmware to the chip, communicate with the chip via the USB protocol, and also for JTAG debugging. |
| USB-to-UART Bridge | Single-chip USB-to-UART bridge, providing data transfer rates up to 3 Mbps. |
| RGB LED | Addressable RGB LED, driven by GPIO38. |
| 3.3V Power On LED | This indicator lights up when the board is powered via USB. |
| Note: On development boards featuring the ESP32-S3-WROOM-1/1U module series (which use an 8-line SPI Flash/PSRAM) and those featuring the ESP32-S3-WROOM-2 module series, pins GPIO35, GPIO36, and GPIO37 are used for internal communication between the ESP32-S3 chip and the SPI Flash/PSRAM, and are therefore not available for external use. | |
| NO. | P/N | MCU | Flash / PSRAM | Interfaces | Description |
| 1 | ESP32-P4-Function-EV-Board | 32-bit RISC-V MCU | 16 MB Flash on board; 32 MB in-package PSRAM; 4 MB in-package flash in ESP32-C6-MINI-1 | MIPI CSI, MIPI DSI, USB RJ45, I/O, TF card |
ESP32-P4-Function-EV-Board is a multimedia development board based on the ESP32-P4 chip. ESP32-P4 chip features a dual-core RISC-V processor and supports up to 32 MB PSRAM. In addition, ESP32-P4 supports USB 2.0 specification, MIPI-CSI/DSI, H264 Encoder, and various other peripherals. With all of its outstanding features, the board is an ideal choice for developing low-cost, high-performance, low-power network-connected audio and video products |
| 2 | ESP32-S3-DevKitC-1 | 32-bit MCU & 2.4 GHz Wi-Fi & Bluetooth 5 (LE) | 8 MB Flash 8 MB Flash + 3.3V 2 MB Quad PSRAM 8 MB Flash + 3.3V 8 MB Octal PSRAM 32 MB Flash + 1.8V 16 MB Octal PSRAM (Suitable for ESP32-S3-WROOM-2) |
I/O USB |
ESP32-S3 general-purpose development board, based on ESP32-S3-WROOM-1/1U or ESP32-S3-WROOM-2/2U. It has all the ESP32-S3 pins exposed and is easy to connect and use. |
| 3 | ESP32-S2-DevKitC-1 | 32-bit MCU & 2.4 GHz Wi-Fi & Bluetooth 5 (LE) | 4MB Flash, 8MB Flash + 2 MB PSRAM | I/O USB |
ESP32-S2 general-purpose development board, based on ESP32-S2-SOLO series. It has all the ESP32-S2 pins exposed and is easy to connect and use. |
| 4 | ESP32-C3-DevKitM-1 | 32-bit RISC-V MCU & 2.4 GHz Wi-Fi & Bluetooth LE 5 (LE) | 4 MB Flash | I/O USB |
ESP32-C3-DevKitM-1 is an entry-level development board based on ESP32-C3-MINI-1 or ESP32-C3-MINI-1U, modules named for its small size. This board integrates complete Wi-Fi and Bluetooth® Low Energy functions. |
| 5 | ESP32-C5-DevKitC-1 | 32-bit RISC-V MCU & 2.4 and 5 GHz Wi-Fi 6 & Bluetooth 5 (LE) & IEEE 802.15.4 | 8 MB Flash + 4 MB PSRAM | I/O USB |
ESP32-C5-DevKitC-1 is an entry-level development board based on the general-purpose module ESP32-C5-WROOM-1(U). This board integrates complete Wi-Fi, Bluetooth LE, Zigbee, and Thread functions. |
| 6 | ESP32-DevKitC | 32-bit MCU & 2.4 GHz Wi-Fi & BT/Bluetooth LE | 4 / 8 MB Flash | I/O USB |
ESP32-DevKitC is a small-sized ESP32-based development board produced by Espressif. Most of the I/O pins are broken out to the pin headers on both sides for easy interfacing. Developers can either connect peripherals with jumper wires or mount ESP32-DevKitC on a breadboard. |
| 7 | ESP32-LyraT-Mini | 32-bit MCU & 2.4 GHz Wi-Fi & BT/Bluetooth LE | 8 MB Flash + 8 MB PSRAM | I2S I2C SDIO ADC UART GPIO |
ESP32-LyraT-Mini is a lightweight audio development board based on ESP32-WROVER-E, which implements AEC, AGC, NS WWE (wake word engine) and other audio signal processing technologies. |
| 8 | ESP32-PICO-KIT-1 | 32-bit MCU & 2.4 GHz Wi-Fi & BT/Bluetooth LE | 4 MB Flash | I/O USB |
The ESP32-PICO-KIT-1 is an ESP32-based development board produced by Espressif. ESP32-PICO-KIT-1 provides users with hardware for development of applications based on ESP32, making it easier for users to explore ESP32 functionalities. |
| 9 | ESP32-S3-BOX-3 | 32-bit MCU & 2.4 GHz Wi-Fi & Bluetooth 5 (LE) | 1.8V 16 MB Quad Flash + 1.8V 16 MB Octal PSRAM | USB I/O, Pmod™ Compatible Interlace, MicroSD Slot, 18650 Battery Slot |
The ESP32-S3-BOX-3 is a next-generation development tool designed for AIoT, Edge AI, and IIoT applications. It is based on the powerful ESP32-S3 SoC and features a compact and beautiful enclosure also provides rich assemblies, empowering developers to easily customize and expand its functionality. |
| 10 | ESP32-C6-DevKitC-1 | 32-bit RISC-V MCU & 2.4 GHz Wi-Fi 6 & Bluetooth 5 (LE) & IEEE 802.15.4 | 8 MB Flash | I/O USB |
ESP32-C6-DevKitC-1 is an entry-level development board based on ESP32-C6-WROOM-1(U), a general-purpose module with an 8 MB SPI flash. This board integrates complete Wi-Fi, Bluetooth LE, Zigbee, and Thread functions. |
| 11 | ESP32-S3-EYE | 32-bit MCU & 2.4 GHz Wi-Fi & Bluetooth 5 (LE) | 8 MB Flash + 8 MB PSRAM | USB | The ESP32-S3-EYE board consists of two parts: the main board (ESP32-S3-EYE-MB) that integrates the ESP32-S3-WROOM-1 module, camera, SD card slot, digital microphone, USB port, and function buttons; and the sub board (ESP32-S3-EYE-SUB) that contains an LCD display. The main board and sub board are connected through pin headers. |
| 12 | ESP Thread Border Router/Zigbee Gateway | 32-bit RISC-V MCU & Bluetooth 5 (LE) & IEEE 802.15.4 | 8 MB Flash and 2 MB PSRAM in ESP32-S3-WROOM-1 + 2 MB Flash in ESP32-H2-MINI-1 | I/O USB type-C |
ESP Thread Border Router/Zigbee Gateway board integrates the ESP32-S3 SoC and the ESP32-H2 RCP, enabling the development of Thread Border Router and Zigbee Gateway products. Espressif's Thread Border Router solution complies with Thread 1.3 and supports the Matter application. |
){kind=link}